Extraction process and characterization of Taraxacum kok-saghyz (TKS) latex.

Taraxacum kok-saghyz (TKS) latex is a natural latex produced from its root, and its extraction optimization process is mainly studied in the present paper. The composition of fresh roots of TKS was quantitatively analyzed, and the results showed that the moisture content of the fresh root was approximately 70 %, and the rubber content averaged to 6 % (dry weight ratio). An optimal process route for extracting the TKS latex was finally determined, making the extraction efficiency reach about 80 %, and a new latex extraction process was established and optimized and named "the process of Buffer Extraction TKS Latex (BETL)". Hevea latex, extracted TKS latex and TKS latex collected directly from the broken roots were compared for study. The results showed that, like Hevea latex, the appearance of TKS latex was milky white; and after centrifugation, both showed four layers from top to bottom: rubber particles, Frey-Wyssling particles, C-serum and lutoids. The results of the composition analysis showed that the concentration of TKS latex ranged from 54.54 % to 68.25 %, which is close to that of concentrated Hevea latex; the moisture content of TKS latex was between 31.75 % and 45.46 %. The protein content of TKS latex was 13.51 mg/mL, which was lower than that of Hevea latex at the same rubber hydrocarbon concentration. The molecular structures and properties of Hevea latex, the extracted TKS latex, and the collected TKS latex were characterized by FTIR, 13C NMR, GPC, TG, SEM and LPSA, and the results showed that the main components and structure of the three latexes were similar, which are all cis-1,4-polyisoprene, and include the proteins and lipids. The distributions molecular weights of the three latexes all showed a bimodal distribution, but the molecular weight of the latex collected from TKS was lower, which indicates the larger molecules were difficult to flow outside the root automatically. The Hevea latex and TKS latex rubber particles were both core-shell structure and the size distribution were bimodal, which was consistent with the GPC analysis results.

Decision-making experiences and the need for decision aids in women considering vaginal birth after cesarean: A qualitative meta-synthesis.

AIMS: This study aims to comprehensively explore the decision-making requirements of women contemplating vaginal birth after cesarean (VBAC). DESIGN & METHODS: A meta-synthesis approach was employed for this study. Using an integrative methodology, we conducted a systematic assessment of women's experiences and needs related to VBAC decision-making. A comprehensive search was conducted across The Cochrane Library, PubMed, EMBASE, Ovid Medline, SCOPUS, Cumulative Index to Nursing and Allied Health Literature (CINAHL), PsycINFO, and Wan Fang databases to identify pertinent studies between 2000 and 2022. Furthermore, the reference lists of the included studies were thoroughly examined. RESULTS: Fifteen studies were incorporated, from which seven themes emerged: emotional changes, preference for vaginal birth, unmet information needs, influences on decision-making, decision-making autonomy, aligning information provision with decision-support needs, and the requirement for support systems. Two primary syntheses were constructed on the decision-making process and the need for decision-making aids, respectively. CONCLUSION: Women opting for VBAC experienced emotional shifts during their decision-making process in pregnancy. There remains a need for an enhanced decision-making tool to guide them in their choice. Recommendations for implementation in VBAC decision aids include facilitating women's involvement in decision-making, satisfying their information needs, and delivering appropriate emotional support.

Gate-tunable Intrinsic Anomalous Hall Effect in Epitaxial MnBi2Te4 Films.

The anomalous Hall effect (AHE) is an important transport signature revealing topological properties of magnetic materials and their spin textures. Recently, MnBi2Te4 has been demonstrated to be an intrinsic magnetic topological insulator. However, the origin of its intriguing AHE behaviors remains elusive. Here, we demonstrate the Berry curvature-dominated intrinsic AHE in wafer-scale MnBi2Te4 films. By applying back-gate voltages, we observe an ambipolar conduction and n-p transition in ∼7-layer MnBi2Te4, where a quadratic relation between the AHE resistance and longitudinal resistance suggests its intrinsic AHE nature. In particular, for ∼3-layer MnBi2Te4, the AHE sign can be tuned from pristine negative to positive. First-principles calculations unveil that such an AHE reversal originated from the competing Berry curvature between oppositely polarized spin-minority-dominated surface states and spin-majority-dominated inner bands. Our results shed light on the underlying physical mechanism of the intrinsic AHE and provide new perspectives for the unconventional sign-tunable AHE.

Clinical application status of multiple localization methods in the treatment of pulmonary nodules by sub-lobectomy / 中国胸心血管外科临床杂志

@#The precise localization of pulmonary nodules has become an important technical key point in the treatment of pulmonary nodules by thoracoscopic surgery, which is a guarantee for safe margin and avoiding removal of too much normal lung parenchyma. With the development of medical technology and equipment, the methods of locating pulmonary nodules are also becoming less trauma and convenience. There are currently a number of methods applied to the preoperative or intraoperative localization of pulmonary nodules, including preoperative percutaneous puncture localization, preoperative transbronchial localization, intraoperative palpation localization, intraoperative ultrasound localization, and localization according to anatomy. The most appropriate localization method should be selected according to the location of the nodule, available equipment, and surgeon鈥檚 experience. According to the published literatures, we have sorted out a variety of different theories and methods of localization of pulmonary nodules in this article, summarizing their advantages and disadvantages for references.

A review on the mechanisms underlying the antitumor effects of natural products by targeting the endoplasmic reticulum stress apoptosis pathway.

Cancer poses a substantial risk to human life and wellbeing as a result of its elevated incidence and fatality rates. Endoplasmic reticulum stress (ERS) is an important pathway that regulates cellular homeostasis. When ERS is under- or overexpressed, it activates the protein kinase R (PKR)-like endoplasmic reticulum kinase (PERK)-, inositol-requiring enzyme 1 (IRE1)- and activating transcription Factor 6 (ATF6)-related apoptotic pathways to induce apoptosis. Tumor cells and microenvironment are susceptible to ERS, making the modulation of ERS a potential therapeutic approach for treating tumors. The use of natural products to treat tumors has substantially progressed, with various extracts demonstrating antitumor effects. Nevertheless, there are few reports on the effectiveness of natural products in inducing apoptosis by specifically targeting and regulating the ERS pathway. Further investigation and elaboration of its mechanism of action are still needed. This paper examines the antitumor mechanism of action by which natural products exert antitumor effects from the perspective of ERS regulation to provide a theoretical basis and new research directions for tumor therapy.

[Spatial Distribution of Aerobic Bacteria, Sources and Risks of Nitrogen and Phosphorus in Taihu Lake Sediments].

The release of nitrogen and phosphorus from sediments into lake water will exacerbate the eutrophication of lakes and endanger ecological safety and human health. Microorganisms are indispensable in nitrogen and phosphorus conversion, and accurate analysis of the distribution characteristics and sources of nitrogen and phosphorus in sediments as well as their relationship with microorganisms is an important prerequisite for lake eutrophication control. Taking Taihu Lake as the study area, 30 surface sediment samples were collected, and the grain size, pH, organic matter (OM), dissolved organic carbon (DOC), total phosphorus (TP), total nitrogen (TN), nitrate nitrogen (NO3--N), and dissolved organic nitrogen (DON) along with some other index contents were measured and analyzed; accordingly, spatial distribution characteristics were analyzed. While using nutrient agar (NA), the number of aerobic bacteria (AB) was determined by plate counting in the medium. Combined with principal component analysis (PCA) and Pearson correlation analysis, the spatial distribution characteristics and sources of sediments and AB in Taihu Lake were explored. The characteristics of sediment pollution in Taihu Lake were studied using the comprehensive pollution index and the organic pollution index methods. The results revealed that the average sediment indicators of the surface layer of Taihu Lake were as follows:AB was 9.25×104 CFU·g-1, average particle size (MZ) was 17.59 µm, pH was 7.62, ω(OM) was 15.05 g·kg-1, ω(DOC) was 71.60 mg·kg-1, ω(TP) was 598.13 mg·kg-1, ω(TN) was 1113.92 mg·kg-1, ω(NO3--N) was 3.22 mg·kg-1, and ω(DON) was 22.60 mg·kg-1. The comprehensive pollution index (FF) showed that 13% of the Taihu Lake was moderately polluted, while 87% was heavily polluted. Excluding the area in the center of the lake, the southern lake area, and some lakes in the western part of the East Taihu Lake, TN in the rest of the area was moderately and severely polluted. In addition to the heavy pollution of Zhushan Bay, the TP in Taihu Lake was generally at light and moderate pollution. The organic pollution index (OI) showed that the organic pollution of the sediments of Taihu Lake was relatively light, majorly caused by organic nitrogen (ON) pollution. DOC, DON, TN, and OM in Taihu Lake were primarily derived from the influence of aquatic plants, and TP And AB were primarily derived from the influence of the external input of rivers. This research will provide theoretical support for lake eutrophication treatment and also provide new ideas for further analysis of AB to remove nitrogen and phosphorus pollution from sediments.

Preparation of Taraxacum kok-saghyz Rubber and Biofuel Ethanol Simultaneously by the Yeast Fermentation Process.

Taraxacum kok-saghyz(TKS) rubber is considered the most ideal alternative source of natural rubber (NR). Extracting rubber from TKS with high quality, low cost, and low pollution is the basis of commercial development. The TKS roots were subjected to morphological observation and detailed compositional analysis. Scanning electron microscopy (SEM) images confirm that rubber filaments are physically entangled with plant tissues due to differences in molecular polarity. Compared with the traditional solvent TKS rubber extraction process, a new rubber extraction process developed in this study, namely, the microbial extraction (″ME″) process, is less harmful to the environment and lower in cost. The ″ME″ process is divided into three steps: dilute acid pretreatment process, enzyme degradation process, and fermentation process. After each step is completed, the purity of TKS rubber will gradually increase from 84.8% to 93.8 to 95.5%. The TKS rubber finally obtained fully meets the requirements of the traditional rubber industry, especially the tire industry. Besides, the yield of biofuel ethanol, a by-product of cellulose fermentation, reaches 2.05 g/100 g of TKS roots (dry weight), which can effectively reduce the production cost of TKS rubber. In the rubber extraction process, microorganisms have little effect on the quality of TKS rubber. The results show that the molecular weight and chemical structure of TKS rubber is very close to NR, so the ″ME″ process can be used as a new method for large-scale extraction of TKS rubber.

Anion Exchange Facilitates the In Situ Construction of Bi/BiO Interfaces for Enhanced Electrochemical CO2 -to-Formate Conversion Over a Wide Potential Window.

Electrochemical reduction of CO2 (CO2 RR) into value-added products is a promising strategy to reduce energy consumption and solve environmental issues. Formic acid/formate is one of the high-value, easy-to-collect, and economically viable products. Herein, the reconstructed Bi2 O2 CO3 nanosheets (BOCR NSs) are synthesized by an in situ electrochemical anion exchange strategy from Bi2 O2 SO4 as a pre-catalyst. The BOCR NSs achieve a high formate Faradaic efficiency (FEformate ) of 95.7% at -1.1 V versus reversible hydrogen electrode (vs. RHE), and maintain FEformate above 90% in a wide potential range from -0.8 to -1.5 V in H-cell. The in situ spectroscopic studies reveal that the obtained BOCR NSs undergo the anion exchange from Bi2 O2 SO4 to Bi2 O2 CO3 and further promote the self-reduction to metallic Bi to construct Bi/BiO active site to facilitate the formation of OCHO* intermediate. This result demonstrates anion exchange strategy can be used to rational design high performance of the catalysts toward CO2 RR.

High-Frequency Ultrasound-Guided Temporal Fat Transplantation: A Safe and Visualized Approach.

SUMMARY: Autologous fat injection is one of the most popular methods for the treatment of temporal depression; however, accurate puncture into the target layer without vascular compromise is hard to achieve. With the aid of high-frequency ultrasonography, the authors performed autologous fat transplantation after visualization in five cases, with satisfactory results. The authors observed the course of superficial temporal vessels, the orbitozygomatic artery, and sentinel veins preoperatively, and used high-frequency ultrasonography to guide lipotransfer into the desired layer intraoperatively, to avoid intravascular injection. With the aid of high-frequency ultrasonography, the authors can easily prevent vascular complications and personalize surgical procedures, as anatomical variations of vasculature can also be detected by means of this method.

Force-induced ion generation in zwitterionic hydrogels for a sensitive silent-speech sensor.

Human-sensitive mechanosensation depends on ionic currents controlled by skin mechanoreceptors. Inspired by the sensory behavior of skin, we investigate zwitterionic hydrogels that generate ions under an applied force in a mobile-ion-free system. Within this system, water dissociates as the distance between zwitterions reduces under an applied pressure. Meanwhile, zwitterionic segments can provide migration channels for the generated ions, significantly facilitating ion transport. These combined effects endow a mobile-ion-free zwitterionic skin sensor with sensitive transduction of pressure into ionic currents, achieving a sensitivity up to five times that of nonionic hydrogels. The signal response time, which relies on the crosslinking degree of the zwitterionic hydrogel, was ~38 ms, comparable to that of natural skin. The skin sensor was incorporated into a universal throat-worn silent-speech recognition system that transforms the tiny signals of laryngeal mechanical vibrations into silent speech.

Effect and cerebral mechanism of moxibustion at heat-sensitized Yaoyangguan (GV3) in patients with lumbar disc herniation and myofascial pain syndrome by resting-state functionality magnetic resonance imaging: protocol for an observational study.

We want to explore the analgesic brain effect of the moxibustion at heat-sensitized Yaoyangguan (GV3) in patients with lumbar disc herniation (LDH) and myofascial pain syndrome (MPS). In an assessor-blinded observational study, we will include 15 LDH and 15 MPS. They will accept same treatment of heat-sensitive moxibustion at Yaoyangguan (GV3). The resting-state functionality magnetic resonance imaging image data of brain activities before and after treatment will be analyzed by mean fractional amplitude of low-frequency fluctuation, regional homogeneity analysis and brain functional connection. We select seed of first sensory cortex, second sensory cortex, insula cortex, periaqueductal gray and anterior cingulate cortex as the regions of interest to analyse the relationship between brain functional connectivity of pain-related networks and clinical data. Our study could disclose key brain targets and central response characteristics of the analgesic brain effect and the brain functional connection of heat-sensitive moxibustion.

Global Research Trends and Perspectives of Blepharoplasty: A 20-Year Bibliometric Analysis Based on Web of Science.

BACKGROUND: The number of publications on blepharoplasty is increasing rapidly. Bibliometric analysis can help surgeons quickly and systematically understand the current state of development. To our knowledge, there are no bibliometric studies on blepharoplasty, and therefore, we conducted this study to reveal research trends and perspectives of blepharoplasty. METHODS: Relevant publications from 2002 to 2021 were extracted from the Web of Science Core Collection database. After manual screening, VOSviewer software and CiteSpace software were used to collect and analyze the acquired data. RESULTS: A total of 1125 publications were included and the publications per year increased annually. Contributions from the USA led both quantity and quality. The University of California System was one of the most influential academic institutions. Aesthetic Plastic Surgery had the most publications, and Plastic and Reconstructive Surgery was the most frequently cited or co-cited journal. Massry GG and Hamra ST were the most prolific and co-cited authors, respectively. Additionally, Rohrich RJ had the highest number of citations per publication. References co-cited analysis identified that lower eyelid research was a hotspot. Keywords were mainly divided into 6 clusters, namely "lower lid blepharoplasty," "complications," "facial rejuvenation," "blepharoptosis," "upper blepharoplasty," and "Asian blepharoplasty and epicanthoplasty." CONCLUSIONS: Blepharoplasty research is flourishing, and three clusters may be the hotspots: "Lower blepharoplasty and mid-face rejuvenation," "overall facial outcome and quality-of-life," and "Asian blepharoplasty and epicanthoplasty." LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Effects of miR126 Expressing Adipose-Derived Stem Cells on Fat Graft Survival and Angiogenesis.

BACKGROUND: Fat transplantation supported by supplementation with ASCs has become a reliable procedure for treating soft tissue defects. However, the unpredictable survival rates for grafted fat remains a challenge with post-transplantation ischemia causing tissue loss. MiR126, which regulates VEGF signaling, is an endothelial cell-specific miRNA known to play an essential role in angiogenesis. We hypothesized that increased miR126 expression in grafted ASCs may promote fat survival within an autologous fat transfer model. METHODS: Rat adipose-derived stem cells were isolated, expanded ex vivo for three passages and then transduced with miR126. We used PCR to verify lentiviral transduction and ELISA to confirm VEGF expression. We then mixed autologous fat tissues from our rat model with transduced ASCs, augmented with a nonsense control or miR126 expression vector. These mixtures were used in the fat grafting procedure, completed via subcutaneous injection at three paravertebral points in each rat. Fat grafts were then harvested on days 4, 7, 14, and 28 post-transplant and evaluated for survival, neovascularization, and protein expression via western blot. RESULTS: VEGF expression levels in ASCs, Con-ASCs, and miR126-ASCs were not significantly different. However, miR126-ASCs experienced significantly improved survival on days 7, 14, and 28 when compared with the other groups. These ASCs also presented with the greatest capillary density on days 7, 14, and 28 post-transplantation as well as increased p-ERK and p-AKT expression when compared to the other groups. CONCLUSION: This data suggests that miR126 augmentation of ASCs may help to enhance the survival and angiogenic capacity of transplanted fat tissues, and that this augmentation was not dependent on VEGF but rather the activation of the ERK/AKT pathway. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

A bibliometric and visual analysis of cancer-associated fibroblasts.

Background: Cancer-associated fibroblasts (CAFs) represent the predominant stromal component within the tumour microenvironment (TME), exhibiting considerable heterogeneity and plasticity that significantly impact immune response and metabolic reprogramming within the TME, thereby influencing tumour progression. Consequently, investigating CAFs is of utmost importance. The objective of this study is to employ bibliometric analysis in order to evaluate the current state of research on CAFs and predict future areas of research and emerging trends. Methods: Conduct a comprehensive search for scholarly publications within the Web of Science Core Collection database, encompassing the time period from January 1, 2001, to December 31, 2022. Apply VOSviewer, CiteSpace, R software and Microsoft Excel for bibliometric analysis and visualisation. Results: This study involved a comprehensive analysis of 5,925 publications authored by 33,628 individuals affiliated with 4,978 institutions across 79 countries/regions. These publications were published in 908 journals, covering 14,495 keywords and 203,947 references. Notably, there was a significant increase in articles published between 2019 and 2022. China had the highest count of articles, while the United States emerged as the most frequently cited country. The primary research institutions in this field were Shanghai Jiao Tong University, Harvard University, and the University of Texas MD Anderson Cancer Center. Sotgia, Federica and Lisanti, Michael P from the University of Manchester, and Martinet, Wim from the University of Antwerp were the most prolific and highly cited authors. The journal Cancers had the highest number of publications, while Cancer Research was the most frequently cited journal. Molecular, biology, immunology, medicine and genetics were the main research disciplines in the field of CAFs. Key directions in CAFs research encompassed the study of transforming growth factor-ß, Fibroblast Activation Protein, breast cancer, as well as growth and metastasis. The findings from the analysis of keyword co-occurrence and literature co-citation have revealed several emerging hotspots and trends within the field of CAFs. These include STAT3, multidrug resistance, pancreatic ductal adenocarcinoma, pan-cancer analysis, preclinical evaluation, ionizing radiation, and gold nanoparticles. Conclusion: Targeting CAFs is anticipated to be a novel and effective strategy for cancer treatment. This study provides a comprehensive overview of the existing research on CAFs from 2001 to 2022, utilizing bibliometric analysis. The study identified the prominent areas of investigation and anticipated future research directions, with the aim of providing valuable insights and recommendations for future studies in the field of CAFs.

Incomplete insertion of pedicle screws triggers a higher biomechanical risk of screw loosening: mechanical tests and corresponding numerical simulations.

Screw loosening is a widely reported issue after spinal screw fixation and triggers several complications. Biomechanical deterioration initially causes screw loosening. Studies have shown that incomplete insertion of pedicle screws increases the risk of screw breakage by deteriorating the local mechanical environment. However, whether this change has a biomechanical effect on the risk of screw loosening has not been determined. This study conducted comprehensive biomechanical research using polyurethane foam mechanical tests and corresponding numerical simulations to verify this topic. Pedicle screw-fixed polyurethane foam models with screws with four different insertion depths were constructed, and the screw anchoring ability of different models was verified by toggle tests with alternating and constant loads. Moreover, the stress distribution of screw and bone-screw interfaces in different models was computed in corresponding numerical mechanical models. Mechanical tests presented better screw anchoring ability with deeper screw insertion, but parameters presented no significant difference between groups with complete thread insertion. Correspondingly, higher stress values can be recorded in the model without complete thread insertion; the difference in stress values between models with complete thread insertion was relatively slight. Therefore, incomplete thread insertion triggers local stress concentration and the corresponding risk of screw loosening; completely inserting threads could effectively alleviate local stress concentration and result in the prevention of screw loosening.

A Novel Technique of Urethroplasty Could Reduce Urethra-Related Complications in Phalloplasty With Urethral Lengthening.

INTRODUCTION: Urethral lengthening in phalloplasty could bring many postoperative complications, such as urethra fistula and stricture, which greatly affects the patient's mental health and quality of life. AIM: To describe a novel technique of vaginal mucosal graft for prelamination urethra (VMGPU) combined with modified urethral anastomosis (MUA) for the reconstruction of a neourethra. METHODS: A retrospective study of transgender men between January 2006 and March 2021 was conducted. Patients were divided into three groups according to the surgical methods : traditional group（TG，VMGPU group（VG） and VMGPU+MUA group (VMG). MAIN OUTCOME MEASURE: The main outcomes measures were demographics, surgical characteristics, complications, International Prostate Symptom Score（IPSS，Quality of Life（QOL） score，and voiding frequency conditions. RESULTS: Of 80 eligible transgender men（TG:n = 39，VG:n = 31, VMG:n = 10), the urethral fistula developed in 19/39 (49%) patients in TG, 8/31 (26%) in VG, and 1/10 (10%) in VMG (P = 0.034). The urethral stricture formed in 15/39 (38%) patients in TG, 4/31 (13%) in VG, and 1/10 (10%) in VMG (P = 0.028). Compared with TG, the VG got more favorable IPSS. The QOL scores showed that patients in VG or VMG were more satisfied with their postoperative status. CLINICAL IMPLICATIONS: VMGPU combined with MUA may help reduce urethral complications for transgender men who wish to undergo phalloplasty with urethral lengthening. STRENGTH & LIMITATIONS: VMGPU combined with MUA focuses on reducing the urethra-related complications in the anastomotic stoma between the fixed and the penile urethra, which has not been noticed in the past. The limitations of this study are that the retrospective study design is prone to bias; the study using VMGPU+MUA technique is only in the preliminary stage, and more cases are needed to prove its effectiveness; the median follow-up in VMG was only 2 years, and longer-term follow-up results are inconclusive; the IPSS, QOL, and the voiding frequency chart were not validated in transgender men. CONCLUSION: Our pilot study suggests that VMGPU combined with MUA may reduce the urethra-related complications, especially the urethral fistula in the anastomosis stoma between the fixed and the penile urethra. Gao H, Wu D, Kong X, et al. A Novel Technique of Urethroplasty Could Reduce Urethra-Related Complications in Phalloplasty With Urethral Lengthening. Sex Med 2022;10:100571.

Enhanced Oil Recovery Mechanism and Technical Boundary of Gel Foam Profile Control System for Heterogeneous Reservoirs in Changqing.

The gel plugging and flooding system has a long history of being researched and applied, but the Changqing reservoir geological characteristics are complex, and the synergistic performance of the composite gel foam plugging system is not fully understood, resulting in poor field application. Additionally, the technique boundary chart of the heterogeneous reservoir plugging system has hardly appeared. In this work, reservoir models of porous, fracture, and pore-fracture were constructed, a composite gel foam plugging system was developed, and its static injection and dynamic profile control and oil displacement performance were evaluated. Finally, combined with the experimental studies, a technical boundary chart of plugging systems for heterogeneous reservoirs is proposed. The research results show that the adsorption effect of microspheres (WQ-100) on the surface of elastic gel particles-1 (PEG-1) is more potent than that of pre-crosslinked particle gel (PPG) and the deposition is mainly on the surface of PPG. The adsorption effect of PEG-1 on the surface of PPG is not apparent, primarily manifested as deposition stacking. The gel was synthesized with 0.2% hydrolyzed polyacrylamide (HPAM) + 0.2% organic chromium cross-linking agent, and the strength of enhanced gel with WQ-100 was higher than that of PEG-1 and PPG. The comprehensive value of WQ-100 reinforced foam is greater than that of PEG-1, and PPG reinforced foam, and the enhanced foam with gel has a thick liquid film and poor foaming effect. For the heterogeneous porous reservoir with the permeability of 5/100 mD, the enhanced foam with WQ-100 shows better performance in plugging control and flooding, and the recovery factor increases by 28.05%. The improved foam with gel enhances the fluid flow diversion ability and the recovery factor of fractured reservoirs with fracture widths of 50 µm and 180 µm increases by 29.41% and 24.39%, respectively. For pore-fractured reservoirs with a permeability of 52/167 mD, the PEG + WQ-100 microsphere and enhanced foam with WQ-100 systems show better plugging and recovering performance, and the recovery factor increases are 20.52% and 17.08%, 24.44%, and 21.43%, respectively. The smaller the particle size of the prefabricated gel, the more uniform the adsorption on the foam liquid film and the stronger the stability of the foam system. The plugging performance of the composite gel system is stronger than that of the enhanced gel with foam, but the oil displacement performance of the gel-enhanced foam is better than that of the composite gel system due to the "plug-flooding-integrated" feature of the foam. Combined with the plugging and flooding performance of each plugging system, a technique boundary chart for the plugging system was established for the coexisting porous, fracture, and pore-fracture heterogeneous reservoirs in Changqing Oilfield.

Rhizobacteria communities reshaped by red mud based passivators is vital for reducing soil Cd accumulation in edible amaranth.

Red mud (RM) was constantly reported to immobilize soil cadmium (Cd) and reduce Cd uptake by crops, but few studies investigated whether and how RM influenced rhizobacteria communities, which was a vital factor determining Cd bioavailability and plant growth. To address this concern, high-throughput sequencing and bioinformatics were used to analyze microbiological mechanisms underlying RM application reducing Cd accumulation in edible amaranth. Based on multiple statistical models (Detrended correspondence analysis, Bray-Curtis, weighted UniFrac, and Phylogenetic tree), this study found that RM reduced Cd content in plants not only through increasing rhizosphere soil pH, but by reshaping rhizobacteria communities. Special taxa (Alphaproteobacteria, Gammaproteobacteria, Actinobacteriota, and Gemmatimonadota) associated with growth promotion, anti-disease ability, and Cd resistance of plants preferentially colonized in the rhizosphere. Moreover, RM distinctly facilitated soil microbes' proliferation and microbial biofilm formation by up-regulating intracellular organic metabolism pathways and down-regulating cell motility metabolic pathways, and these microbial metabolites/microbial biofilm (e.g., organic acid, carbohydrates, proteins, S2-, and PO43-) and microbial cells immobilized rhizosphere soil Cd via the biosorption and chemical chelation. This study revealed an important role of reshaped rhizobacteria communities acting in reducing Cd content in plants after RM application.

Research progress in screw-rod fixation system in the treatment of unstable sacral fracture / 中华创伤杂志

Unstable sacral fracture is usually caused by high-energy trauma. Unstable sacral fracture often results in damage to the mechano-conductive structures of the spine and pelvis and thereby affects walking dysfunction. Treatment of sacral fracture has been a challenge due to the complex local anatomy, unique biomechanics and poor bone quality of the sacrum. The screw-rod fixation system has always played an important role in the treatment of variant sacral fracture and more severe sacral fracture. With the introduction of new technology, the screw-rod fixation system has evolved into a variety of structural types. According to whether the fixation range extends to the spine, it can be divided into two categories including spine-pelvic stabilization techniques and pelvic stabilization techniques. The authors review the progress of the screw-rod fixation system in the treatment of sacral fracture from aspects of biomechanical properties and clinical efficacy, so as to provide a reference for the selection of clinical internal fixation.

Fixation with S 2 alar iliac screws for unstable injury to posterior pelvic ring / 中华创伤骨科杂志

Objective:To explore the fixation with S 2 alar iliac screws (S 2AI) for unstable injury to the pelvic posterior ring. Methods:The clinical data of 18 patients were analyzed retrospectively who had been treated for unstable injury to the posterior pelvic ring by S 2AI screw fixation at Division of Orthopaedics and Traumatology, Department of Orthopaedics, Nanfang Hospital, Southern Medical University and at Department of Orthopaedics and Traumatology, The First Affiliated Hospital to University of South China from September 2017 to December 2020. They were 8 males and 10 females, with an average age of 40 years (from 20 to 64 years). According to Tile classification, there were 3 cases of type B2, 10 cases of type C1 and 5 cases of type C2. Sacral nerve injury was complicated in 3 patients (2 cases of Gibbons grade Ⅱ and one of Gibbons grade Ⅲ). Short-segment S 1-S 2AI fixation was used in 6 cases, contralateral S 1-S 2AI fixation in one case, lumbar-pelvic fixation in 5 cases, and sacroiliac triangle fixation in 6 cases. The accuracy of S 2AI placement was evaluated by CT after operation according to the Shillingford method; the reduction quality of pelvic fractures and complications were documented. Results:All the 18 patients were followed up for 19.8 months (from 12 to 36 months). Bony union was achieved in all fractures. A total of 21 S 2AI were implanted in the 18 patients without intraoperative neurovascular injury. Postoperative CT found penetration into the iliac cortex by S 2AI in 2 cases. According to the Matta criteria, the fracture reduction was excellent in 10 cases, good in 7 and fair in one. Of the 3 patients with preoperative sacral nerve injury, 2 with grade Ⅱ injury recovered to grade Ⅰ and one with grade Ⅲ injury recovered to grade Ⅱ after operation. Superficial infection occurred at the incision site in 2 patients after operation, and complications such as protrusion, rupture or loosening of implants were observed in none of the patients. Conclusion:S 2AI fixation can be flexibly applied to various types of posterior pelvic ring injury and can provide the pelvic ring and the lumbosacral junction with rigid fixation, leading to a low complication rate.